Fluke Networks Pro 3000 Probe & Pro 3000 Toner Circuit Tester

THE LISTING IS FOR A...

Fluke Networks Pro3000™ Analog Tone and Probe - 2600090 - USED **VGC**

ITEM CONDITION...

The kit is pre-owned and in very good condition
There are some small light surface markings to the unit from previous use/handling
No heavy markings or damage

Unsure if due calibration or if calibration is needed

Item has been tested and is in good working order

Please see all listing photos for more detail on condition

ITEM SPECIFICATION...

Pro3000 Analog Tone & Probe Kit tones and traces wire.

Tone and trace wire on non-active networks
SmartToneTM technology provides five distinct tones for exact pair identification
Sends loud tone up to 10 miles (16 kilometers) on most cables
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs
RJ-11 connector is ideal for use on telephone jacks
Attach nylon pouch (included in kit) to your belt for easy transport
Perfect as a wiremap tester
The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone® technology.

Angled bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. The large loud speaker on the network probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily.

You can send this loud tone up to 10 miles (16 kms) on most cables! Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Features

Pro3000 Capability

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator features:

SmartTone technology
Send tone signal up to 10 miles on most cables
Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
Continuity testing
Line polarity confirmation
Pro3000 Design

The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.

Probe features:

Loud large speaker amplifies tone through walls, enclosure, wood or plaster
Easy-to-use adjustable volume control dial
“Quick-twist” tip for easy replacement
Free spare tip inside Pro3000 Tone and Probe Kit
WHAT'S INCLUDED...

1 x Fluke Networks Pro3000™ Analog Tone and Probe - 2600090 - USED **VGC**

All photo’s shown are of the actual item the buyer will receive.

Any accessories not shown in the pictures will not be included, unless otherwise stated.



DELIVERY & COLLECTION...

All items are dispatched same working day if full payment is received before 2pm, otherwise item will be dispatched next working day.

We use several couriers including Royal Mail 48 & Special Delivery, DX & Parcelforce.

Insurance is included with the total price unless otherwise stated for delivery in UK only.

Courier and tracking details will be provided after dispatch.

Collection is available from our store below,

Cash Converters, 544 Christchurch Road, Bournemouth, Dorset, BH1 4BE

Our opening times are Monday to Saturday 10am - 6pm, Closed Sundays & Bank Holidays

THE LISTING IS FOR A...

Fluke Networks Pro3000™ Analog Tone and Probe - 2600090 - USED **VGC**

ITEM CONDITION...

The kit is pre-owned and in very good condition
There are some small light surface markings to the unit from previous use/handling
No heavy markings or damage

Unsure if due calibration or if calibration is needed

Item has been tested and is in good working order

Please see all listing photos for more detail on condition

ITEM SPECIFICATION...

Pro3000 Analog Tone & Probe Kit tones and traces wire.

Tone and trace wire on non-active networks
SmartToneTM technology provides five distinct tones for exact pair identification
Sends loud tone up to 10 miles (16 kilometers) on most cables
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs
RJ-11 connector is ideal for use on telephone jacks
Attach nylon pouch (included in kit) to your belt for easy transport
Perfect as a wiremap tester
The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone® technology.

Angled bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. The large loud speaker on the network probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily.

You can send this loud tone up to 10 miles (16 kms) on most cables! Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Features

Pro3000 Capability

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator features:

SmartTone technology
Send tone signal up to 10 miles on most cables
Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
Continuity testing
Line polarity confirmation
Pro3000 Design

The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.

Probe features:

Loud large speaker amplifies tone through walls, enclosure, wood or plaster
Easy-to-use adjustable volume control dial
“Quick-twist” tip for easy replacement
Free spare tip inside Pro3000 Tone and Probe Kit
WHAT'S INCLUDED...

1 x Fluke Networks Pro3000™ Analog Tone and Probe - 2600090 - USED **VGC**

All photo’s shown are of the actual item the buyer will receive.

Any accessories not shown in the pictures will not be included, unless otherwise stated.



DELIVERY & COLLECTION...

All items are dispatched same working day if full payment is received before 2pm, otherwise item will be dispatched next working day.

We use several couriers including Royal Mail 48 & Special Delivery, DX & Parcelforce.

Insurance is included with the total price unless otherwise stated for delivery in UK only.

Courier and tracking details will be provided after dispatch.

Collection is available from our store below,

Cash Converters, 544 Christchurch Road, Bournemouth, Dorset, BH1 4BE

Our opening times are Monday to Saturday 10am - 6pm, Closed Sundays & Bank Holidays