Circuit Tester Avo Megger Bm400/2 With Case Circuit Tester

AVO MEGGER BM400/2 With Case

Item is in fair used condition, with general signs of use in the form of the odd scratch / scrape

Item comes as shown in the photos, with a case

Item has been tested and is ready for use upon arrival


Key Features and Specifications:

Insulation Resistance Testing:
Test Voltages: Typically offers two or three test voltages, commonly 500V and 1000V DC. Some variants might include a 250V DC option.
Measuring Range: Measures insulation resistance from 0.01 MΩ up to 999 MΩ (on the digital scale), with an analog scale often going up to 10 GΩ.
Output Current: Delivers a nominal 1 mA test current at the specified test voltage.
Short Circuit Current: Provides a short circuit current of at least 200 mA on the continuity ranges.
Continuity Testing:
Measuring Range: Measures continuity from 0.01 Ω up to 99.9 kΩ (digital).
Buzzer: Includes a continuity buzzer that sounds for resistances below a certain threshold (typically around 5 Ω).
Lead Null: Features the ability to null the resistance of the test leads for accurate low-resistance measurements.
Voltage Measurement:
Range: Measures AC and DC voltage, typically up to 600V.
Automatic Detection: Often includes an automatic voltage detection feature that warns the user if a live circuit is connected.
Resistance Measurement:
Offers a separate resistance range measuring up to 100 kΩ (digital) and 10 MΩ (analog) with a low test voltage and current, suitable for testing circuits with sensitive electronic equipment.
Display: Features a large liquid crystal display (LCD) that combines both a digital readout for accurate results and an analog arc display to indicate trends and fluctuations in readings.
Safety:
Designed to meet relevant safety standards such as IEC 1010-1, BS 7671, HD 384, and IEC 364.
Protected against connection to a 440V Category III supply.
Includes a live circuit warning and inhibit function to prevent insulation tests on live circuits above a certain voltage (typically 55V AC/DC).
Features automatic discharge of capacitive circuits after insulation testing.

AVO MEGGER BM400/2 With Case

Item is in fair used condition, with general signs of use in the form of the odd scratch / scrape

Item comes as shown in the photos, with a case

Item has been tested and is ready for use upon arrival


Key Features and Specifications:

Insulation Resistance Testing:
Test Voltages: Typically offers two or three test voltages, commonly 500V and 1000V DC. Some variants might include a 250V DC option.
Measuring Range: Measures insulation resistance from 0.01 MΩ up to 999 MΩ (on the digital scale), with an analog scale often going up to 10 GΩ.
Output Current: Delivers a nominal 1 mA test current at the specified test voltage.
Short Circuit Current: Provides a short circuit current of at least 200 mA on the continuity ranges.
Continuity Testing:
Measuring Range: Measures continuity from 0.01 Ω up to 99.9 kΩ (digital).
Buzzer: Includes a continuity buzzer that sounds for resistances below a certain threshold (typically around 5 Ω).
Lead Null: Features the ability to null the resistance of the test leads for accurate low-resistance measurements.
Voltage Measurement:
Range: Measures AC and DC voltage, typically up to 600V.
Automatic Detection: Often includes an automatic voltage detection feature that warns the user if a live circuit is connected.
Resistance Measurement:
Offers a separate resistance range measuring up to 100 kΩ (digital) and 10 MΩ (analog) with a low test voltage and current, suitable for testing circuits with sensitive electronic equipment.
Display: Features a large liquid crystal display (LCD) that combines both a digital readout for accurate results and an analog arc display to indicate trends and fluctuations in readings.
Safety:
Designed to meet relevant safety standards such as IEC 1010-1, BS 7671, HD 384, and IEC 364.
Protected against connection to a 440V Category III supply.
Includes a live circuit warning and inhibit function to prevent insulation tests on live circuits above a certain voltage (typically 55V AC/DC).
Features automatic discharge of capacitive circuits after insulation testing.